Step by Step to Install 2010-2015 Chevy Camaro Led Headlamp

This is the 6th gen design Camaro headlamp for the 5th gen Chevy Camaro, I will do quick sort of take a look around of what the headlights and then install in my Camaro.

More tips from Catherine Camaro Talking you can follow.
The new headlamp features a pair of halogen h11 bulbs. Here I got some H11 LED bulbs, I want to use these led bulbs on the new headlamp housing. How can I do this? Generally, you just require to remove the dust cap, spin the connector counterclockwise until the light bulb comes out, and after that you will simply disconnect it and plug the new one in. I constantly just put the bulb in first, it will be set, so put it in, turn it clockwise, and after that route the wire down, and plug this back.

While put the dust cover, you don’t push down, it is too difficult, but you do need to push down and turn clockwise to make certain it locks so that you get the complete seal. Next, I’ll install it on the car themselves.

As soon as you get the vehicle already what you require to do next is you’re on turn the wheels to right first or to left. There are three bolts on the wheel, you need to undo all these with a 10-millimeter bolt. You remove and then take all these little pop pins out, when you do that bump or must come right off, take the bumper off and we’ll move on from there.

Got the bumper off, as soon as you take those three bolts off headlight simply moves right out and then take the OEM fog light bulb out of your stock headlight, move it over to your new headlight. And after that all you will do is just plug and play the harnesses and hit the unlock button simply make certain it begins.

I get finished with that put the bumper back up, put the push pins in the top to hold the bumper on. When you do that then you can place the bolts on the bumper and do the remainder of the process, put the bump back on and you are good to go.